Step 1: Open the unit by using the provided backup keys or factory default code which is a single sequential press of each button starting from left to right.  

Step 2: Press and hold the Learn button located in the unit. A beep will sound, and the indicator light will turn green and remain illuminated. This will indicate that the enrollment procedure has been initiated.  

Step 3: The indicator light will remain activated as you enter the new access code. The code can be a minimum of three entries or maximum of six entries (if multiple buttons are press that will be taking as one entry).  

Step 4: Press and hold the Learn button a second time until the indicator light beeps, turns red and remains illuminated. Re-enter new access code.  

Step5: Press and hold the Learn button one last time until the indicator light turns green and beeps six times. If the indicator light flashes red and beeps six times an error has occurred, and you will need to repeat steps 2-5.  

Step 6: Now your unit is programmed and ready to use. 

Step 1: Open the unit by using the provided backup keys or factory default code, which is a single sequential press of each button starting from the left to the right. 

Step 2: Press and hold the learn button located on the interior roof of the unit. A beep will sound and the light will turn green and remain illuminated. This will indicate that the enrollment procedure has been initiated.  

Step 3: The indicator light will remain activated as you enter the new access code. The code can be a minimum of three entries or maximum of six entries (pressing multiple buttons will take it as one entry).  

Step 4: Press and hold the learn button a second time until the indicator light beeps, turns red, and remains illuminated. Re-enter new access code.  

Step 5: Press and hold the Learn button one last time until the indicator light turns green and beeps six times. If the indicator light flashes red and beeps six times an error has occurred and you will need to repeat steps 2-5.